Questions & Answers for: fan light flash second turned

Question about Fujitsu Televison & Video

1 Answer

...the master power button the light starts flashing a red light repeatedly. I also observed that the Fans power up for about three seconds immediatly after i press the master power button, after the ...

Ad

...if the main lamp fails to light? Does the main lamp light at all? It sounds light a cooling fan failure. If the fan iis not working the the main lamp will not turn on and the power light will

Ad

Question about Grand WEGA KDF-55WF655 36" Rear Projection HDTV

1 Answer

...light and fan goes on. In a few seconds the fan stops and the Pwr button flashes red 4 times then pauses and then flashes red again 4 times. It continues and the tv never comes on. There's a fan in ...

Question about PT-LB10SVU Multimedia Projector

1 Answer

...light flashing...please i need help, fan working perfect...i don't have a remote,is a problem, or not i just replace the lamp, and don't have any light coming from lens,starting green (after a few ...

Question about HL-T5675S Television

1 Answer

...light flash on front right corner. Either lamp is failing (not covered under any warranty), or the ballast has failed. Or it may be a problem with the power supply, or even the fans... What is the ...

Question about HL-T5675S Television

1 Answer

kdsr60xbr1, the green power light turns on, but within seconds, the power light starts flashing red. What could be the problem. Thanks Change the lamp. If red led is flashing 4 times. replace lamp fan

Question about Pavilion a1600n (882780776265) PC Desktop

1 Answer

initial flashes of light end, only the fan is running. I've unplugged all hardware and attempted to restart, but I'm having no success. How many times does it flash. The number of flashes = error code

Question about Viera TH-50PX80U Plasma TV

1 Answer

...light up -Temperature Sensor short or open -- Abnormal Temperature Duct Fan stop - When accumulated operation time of the the Lamp reaches 5000 hours, OSD (replacing the Lamp) appears on the screen. ...

...Light Engine (DMD or Lamp Fan stopped) 37 = Exhaust or Lamp Ballast Fan stopped 38 = Lamp Temperature High 39 = DMD Temperature High 41 = Short is detected 44 = DVI cable between FMT and Engine ...

...fan/light unit using the Intertek 3177973 unit. I want to install a second unit for the same light. How do I pair / sync the second remote switch to the existing receiver?? To pair/sync a second ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...