Questions & Answers for: fan assembly

fan assembly Unplug the connector for the cooling fan and . . . . . . remove the fan assembly out the bottom of the vehicle Disconnect the negative battery cable. Raise and safely support the vehicle.

Ad

...fan clutch assembly on a 97 chevy blazer. 1 Remove the fan and clutch assembly from the fan's pulley. The assembly attaches to the pulley with several bolts on the circumference of the pulley. To ...

Ad

Question about 1992 Golf

1 Answer

...fan assembly. There are 4 10mm bolts holding the assembly to the radiator. Unplug the fan and disconnect anything held to the assembly. Remove the assembly, remove the clip holding the fan blade to ...

...fan assembly on 1998 ford escort zx2 need part number and overview of cooling fan assembly first disconnect the fan wiring from the fans then locate the bolts for the fan assembly (usually 4) remove ...

...fan/shroud assembly from the radiator and remove. Fig. 2: Unbolt the fan assembly from the radiator Fig. 3: Remove the fan from the engine Fig. 4: Slide the fan as an assembly up and away from the ...

Question about 1993 Grand Cherokee

1 Answer

fan blade assembly to the viscous fan drive. To install: Install the fan blade on the viscous drive. Install the bolts and tighten them to 17 ft. lbs. (23 Nm). Position the fan shroud, viscous fan and

Question about 2003 Durango

1 Answer

...fan drive assembly from water pump by turning mounting nut counterclockwise as viewed from front - threads on viscous fan drive are right hand. CAUTION Do not attempt to remove fan/viscous fan drive ...

Question about 2003 Durango

1 Answer

fan assembly-1992 vehicle shown To install: 1. Position the fan on the drive clutch. Install the bolt and washer assemblies, then tighten to 12-17 ft. lbs. (16-24 Nm). 2. Position the fan drive clutch

Question about 1995 Thunderbird

1 Answer

fan assembly-1992 vehicle shown To install: 1. Position the fan on the drive clutch. Install the bolt and washer assemblies, then tighten to 12-17 ft. lbs. (16-24 Nm). 2. Position the fan drive clutch

Question about imageRUNNER 400S Copier

1 Answer

...fan numbers II. FANSA. Arrangement and FunctionsFeeder fanFixing assembly heat dischargefan 1***Fixing assembly heat dischargefan 2 ***Laser driver cooling fanLaser scanner motor cooling fan 1Laser ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...