Questions & Answers for: Nintendo DS fall ribbon

...fall by front side so the pin off ac is displace in that if u able to open your dc so open it and clean it and make the battery clean by the connector side okay and see the results you could have ...

fall out. I thought i had it plugged in well there too ,but when i powered it up i had your problem so i opened it up and found that the ribbon wasnt in all the way, and then it would power up, but my

...be the coil just under your power switch. ( really thin solder) Usually it happen when the DS lite falls down. second thing... Blown fused see the F1 and F2 continuity. the Third thing can be the

...component labelled L2 thats situated directly under the power switch, apartently they are prone to fall off when nds is dropped. check yours out to see if it is still there (unfortunately mine isnt ...

fall, the ribbon cable gets jarred and the pin connections are so small that two of them cross and short out. they have to be perfectly aligned. I know its a hassle to ship it but if you take it apart

fall on the floor and it spilt. I am guessing it does not work now. most often what happens is the top screen breaks off ripping the top screen ribbon. Usually a new case and a top screen will fix it,

...this component sits right next to the power switch. It looks like a rectangle. This part easily falls off the board and will cause this to happen. You might be able to here it rattle around if

also suffer from dry solder joints I fixed one with the same symtoms as yours, It's bios was nearly falling off It must be a common problem as I have seen them with hard epoxy over it from the factory

...turns white when it isn't stable and the whole top just broke so it wont lock in place it only falls closed. Is there anything I can do myself to fix this? Hi, The most likely reason for the ...