Question about Lumix DMC-TZ1 Digital Camera
...as somebody mention look for that orange thin ribbon cable and wiggle it slightly and see if it falls out of its socket...to put it back in u need to study the socket it has a latch that flips up ...
...fall, you may never find them again. I took both the lever and the slider off, cleaned them, and got it so it would recenter easily again. Then I put them both back in, popped the cover on (you may ...
...fall, you may never find them again. I took both the lever and the slider off, cleaned them, and got it so it would recenter easily again. Then I put them both back in, popped the cover on (you may ...
...fall with my beloved camera ... now the lens will extend only a fraction of an inch (a 32nd maybe), the motor makes a little cricket-like sound, and I get a "remove lens capt and press > button" ...
Question about Lumix DMC-FX8 Digital Camera
...ribbon is relatively robust.) 6. the sensor is held by 3 tiny star screws. if you don't have the exact screwdriver you should be able to use a small flat screwdriver to carefully unscrew them. Do the ...
...game. Place the parts over a soft material, like a soft clean rag or something like that to avoid falling/crashing problems. If you can identify that very very little motor that moves the lenses in ...
...fall from six feet onto concrete. Whatever you do, do not attempt to open the camera and fix this yourself if you hope to get a free repair: there is quite literally nothing inside which you can fix ...
...ribbon cables, or cracking LCD screens. Fix #6a: This is a variation of Fix #6, and should be tried if the lens barrels appears straight (not crooked). In other words, try this if there's no obvious ...
Usually answered in minutes!
630 Questions
338 Questions
296 Questions
256 Questions
207 Questions