...fall out and bounce into that other dimension where all important little things go. The case should now be ready to split. Gently work the case in two and pay attention to the ribbon cables as you ...
...fall out and bounce into that other dimension where all important little things go. The case should now be ready to split. Gently work the case in two and pay attention to the ribbon cables as you ...
...fall off... its OK its not a complicated connection... just set it aside and put it back when you reassemble the phone. There are 3 plugs and a magnet holding the motherboard chip in place. Assuming ...
...fall out since it is being held in place by the Housing. 5. 4. Be careful not to pull on the wiring harnesses that are attached to the Housing. Carefully unplug the wiring harness that has the RED ...
...fall out since it is being held in place by the Housing. 5. 4. Be careful not to pull on the wiring harnesses that are attached to the Housing. Carefully unplug the wiring harness that has the RED ...
...ribbon cables, or cracking LCD screens. Fix #6a: This is a variation of Fix #6, and should be tried if the lens barrels appears straight (not crooked). In other words, try this if there's no ...
...fall out since it is being held in place by the Housing. 5. 4. Be careful not to pull on the wiring harnesses that are attached to the Housing. Carefully unplug the wiring ...
Question about LTN1535 15 in. HD-Ready LCD Television
...them the video signal probably isn't making it to that half of the lcd. either the video board is falling or the ribbon connector from it to the lcd has failed or possibly the connection where it
Usually answered in minutes!
170 Questions
92 Questions
83 Questions
86 Questions
67 Questions
