...ribbon cable should fall out. DO NOT YET PULL THE RIBBON OUT OF THE CAMERA. Step 7. Totally remove the LCD - Tape a long, narrow strip of paper to the end of the ribbon cable. This paper is to help ...
...fall (from a second floor), the camera landed in wet sand and after that the camera won't record again (it plays the recorded files just ok). Just today i had the time to check the camera, so i ...
...ribbon cable which has blue writing on it. One can test the sensor’s movement by using a toothpick and applying slight pressure to the top part of the black sensor arm. Press very gently. Caution, do ...
Question about Powershot A2000 IS Digital Camera
...fall prey to this can only be corrected by professional repair. But, here are some things that you can do that may correct it. They only seem to work for less than 40% of the lens errors, but if the ...
Question about PowerShot SD1300 IS IXUS 105 Digital Camera
...fall. Another common cause is that the camera was in a pocket or bag and the power button accidentally activated and tried to open the lens against resistance. The mechanism may have simply become ...
...ribbon cables, or cracking LCD screens. Fix #6a: This is a variation of Fix #6, and should be tried if the lens barrels appears straight (not crooked). In other words, try this if there's no ...
...ribbon cables, or cracking LCD screens. Fix #6a: This is a variation of Fix #6, and should be tried if the lens barrels appears straight (not crooked). In other words, try this if there's no ...
Question about PowerShot A410 Digital Camera
...ribbon cables, or cracking LCD screens. Fix #6a: This is a variation of Fix #6, and should be tried if the lens barrels appears straight (not crooked). In other words, try this if there's no ...
...ribbon cables, or cracking LCD screens. Fix #6a: This is a variation of Fix #6, and should be tried if the lens barrels appears straight (not crooked). In other words, try this if there's no ...
Question about PowerShot SD500 / IXUS 700 Digital Camera
ribbon inside the cartridge. For Selphy CP910: Remove the cartridge cover, cartridge and the tray cover. Bend a little covers and they will go. Remove 4 small screws at the bottom, open slowly the top
Usually answered in minutes!
1,383 Questions
944 Questions
808 Questions
687 Questions
597 Questions