...got the factory tires on the car, its printed on the tire, also in owners manual, and on door jam, what ever is printed on tire is what P.S.I the manufacturer requires no matter if its factory or
what is the factory tire size for a Mazda 626 what is the factory tire size for a Mazda 626 1992? Mazda equips your vehicle with more than one possible size during production. Please select the size ...
FACTORY TIRES NOT WORKING I JUST RECIEVED A 1990 LEXUS LS 400 THAT THE PREVIOUS OWNERS HAD INSTALL 20" CHROME RIMS. THEY GAVE ME THE FACTORY TIRES & RIMS BUT WHEN I INSTALLED THE FACTORY RIM &
Question about 2004 Ascender
How do I lower the spare tire without the factory 2004 Isuzu Asce How do I lower the spare tire without the factory jack and tools U need the special wrench to lower the spare, there is no other way ...
tires you have on it Factory vs Aftermarket. Factory is 29R/33F then you start adjusting for the ride/performance you want. Best milage, run them at the limit it says on the sidewall, but it will ride
Question about 2002 VT 750 CD Shadow A.C.E. Deluxe
What is the tire pressure for front and rear tire on a 2001 Honda ace 750? The factory recommendation is 29 psig in both front and rear if you don't carry a passenger. Tire inflation must be ...
...factory 15 inch (diameter) x 6.0 inch (wide) wheels then the tires fitted were size: 205/70R15 (205 is the tyre width in mm and the 15 denotes the tyre bead diameter in inches for fitting to 15 inch ...
but there is no spare do they come standard with a spacesaver or a proper 15in spare wheel and tyre FACTORY SPARE TIRE IN TRUNK HAS LARGER RIM. THE RIM IS 2 INCH BIGGER IN DIAMETER TIRE HEIGHT AND RIM
Question about 2001 Century
factory tires said 33 psi. So put 33 psi in all four tires. But if you changed the tires with different tires I would put the psi it says on the tire andthe new tire gives you a different psi than the
Usually answered in minutes!
Step 2: Please assign your manual to a product: