...factory reset by pressing and holding vcr1 button while pressing the power button. do this with the unit on. It will reset back to factory default. so any saved setting will be lost and you will have ...
Question about HT-S9100THX 7.1 Channel Receiver and Speaker Package Theater System
...factory reset? If you can?t resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer. To reset the AV receiver to its factory defaults, turn it on and, while ...
Question about HT-S9100THX 7.1 Channel Receiver and Speaker Package Theater System
...reset factory settings for onkyo tx-sv303pro without the remote rear speakers were turned to 00db n wont turn back up To reset the AV receiver to factory default ,turn it on and, while holding down ...
...started to switch to the audio setup mode on it's own. After 20 seconds, it returns to normal. Thanks for your help. I would do a factory reset first. ONKYO AVR AV Home Cinema Receiver Factory ...
...reset this receiver,Onkyo TX-DS474 Receiver to factory default please? press and hold the video 1 button and then press the speaker A button - you should see 'clear' on the display. This will reset ...
Question about TX-DS474 Receiver
...reset RC-569M remote controller to factory defaults. Onkyo TX-SR520E A/V receiver and it's remote controller RC-569M can't get along. My remote controller seems to work fine, but the A/V receiver ...
Question about TX-DS474 Receiver
factory defaults To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VIDEO 1] button, press the [STANDBY/ON] button. "CLEAR" will appear on the display and the AV
Question about TX-DS474 Receiver
factory defaults To reset the AV receiver to its factory defaults, turn it on and, while holding down the [VIDEO 1] button, press the [STANDBY/ON] button. "CLEAR" will appear on the display and the AV
Question about TX-DS474 Receiver
...factory reset, there might be a small hole in your remote that you can use a pin to press into. This helps to factory reset some devices. The hole might have something like "reset" written by it. ...
...Factory Reset: If the error persists after power cycling, you may need to perform a factory reset to restore the receiver to its default settings. Note that this will erase all your custom settings, ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions