Questions & Answers for: factory reset dlink dir 615

...reset" the router to the "factory" settings. Turn the router on, connect to its built-in web-interface, and the "default" ID/password should now work. Change the password. Rerun the "Wireless Network ...

...password? To reset the DLink back to the factory defaults - power up the DLink and press and hold the RESET button until the LEDs flash. You can then reconfigure the wireless router with new

...reset the firmware to an earlier version. It will change all settings back to factory defaults. Note: The factory defaults username is admin, and there is no password. Most of the time with the DLink ...

...not reset the firmware to an earlier version. It will change all settings back to factory defaults. Note: The factory defaults username is admin, and there is no password. Thanks & Regards,

...reset it back to factory defaults, locate the button and press and hold it for about 30 seconds. Unplug the router for about 15-20 seconds. After reconnecting it wait 60 seconds, then try to access ...

reset your router to factory defaults. login to your router with admin/admin as the login/password click on wireless settings and enable wireless security mode to wpa and type in the wireless password

reset button for 10 seconds and let it reboot for about 30 seconds. This resets it to factory settings. You have to set it all up again after this...anyways, here's the link(copy and paste) http:/

reset the router to factory defaults before you can connect to Virgin Moble there should be a reset button on the back of the router press and hold for 30sec. and then reboot it here is a link to help

...in flashing PoweR Led for very very very long time... but the green Power LED wont come. Try this please:

...reset button to restore it to its factory settings since I could not access the admin dlink panel without the correct password and now that it is up and running again i can not get the internet light ...