Questions & Answers for: f2 heating pad

...heating pad model number cat92 with control model pc204. Everytime I turn on the controler it will work for about 2 seconds and then it will go to F2 and stay that way. I don't know what that means ...

...Pad or Membrane F2 Oven over heat defective Relay Board or (if present) or defective Sensor F3 Oven Sensor Open Replace Sensor F4 Shorted wire or Sensor locate short and correct it or replace Sensor ...

...Pad or Membrane F2 Oven over heat defective Relay Board or (if present) or defective Sensor F3 Oven Sensor Open Replace Sensor F4 Shorted wire or Sensor locate short and correct it or replace Sensor ...

F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the 'cancel' function and wait 60 seconds. If error

F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board). 2. Press CANCEL. If error code returns after 60 seconds, replace keypad

heating pad model 809. I keep geting the F1 or F2. I unplug it for awhile and when I try to turn it back on, it goes to F1 or F2. I don't even know what this means. The heating pad is not that old

...F2 error code on sunbeam heating pad model cat93, contrller sw404 Crimped the ends of the heating pad cord where it attaches to the pad a little then did the plug and unplug three times while holding ...

...are saying about the problem you have.just scroll down on the page and read. or this one. Electric blanket error code or this one. Get F2 error code on sunbeam heating pad model cat93 contrller ...

...heating pad model 828-511 is showing F2 on controller I unplugged it from power strip, and now plugged into wall outlet. Also, unplugged connector to pad and replugged...still showing F2 Hello, Pat - ...