Fault Code F2 - Error Code E1: Code Explanation: Keypad keytail not connected. Recommended Repair Procedure: 1. Check keypad connector for firm connection. 2. Press CANCEL. If error code returns after
...F2 fault code generally means the Oven temp exceeds 590 w/ unlocked door High resistance or interference in oven temperature sensor Might want to check the oven sensor for high resistance. Get a ohm ...
F2 likely means your control board (ERC) has an issue. I can't vouch for accuracy but here's another location with fault code listings http://www.appliancepartspros.com/repairtips/repairtips_appliance
Question about JTP15 Electric Single Oven
fault "E6 F2"; simply pressing "Timer Off" would usually clear this error & fault code. However, some months later, the display would often go completely blank followed by the beep sequence "short
F2 E0, is an indicated fault in the touchpad, usually in one of the switches, but sometimes in the connection between them. Onsite diagnostics are required to see which component is affected. If
Question about Profile JTP18 Electric Single Oven
i have an f2 fault code on my oven...how do i fix it? Hello there F2 Oven temp exceeds 590 w/ unlocked door High resistance or interference in oven temperature sensor. Replace oven temperature sensor
Question about Profile JTP56 Electric Double Oven
...F2 & F3 are fault codes relating to the oven temperature sensor F2 during bake means a temperature of over 630 deg has been reached F3 means shorted oven temperature sensor What it means is you ...
Fault codes F1 and F2 Just two work there: 1.- Replace the touchpad or the clock (ERC) if the code "F1" is displayed. Disconnect the ribbon connector to the touchpad. If no code is displayed after an ...
...f2 and e6 1. Check keypad connector for firm connection (keypad connects to control board).2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane ...
Question about Profile JTP56 Electric Double Oven
...F2:E5 error code. Power has been turned off and on multiple times. The problem is still there. Not sure if touchpad (keys) are at fault or the control board is at fault. Parts are no longer available ...
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions