...F2 and F3 may be the same since Samsung makes GE microwaves. Those would mean trouble with the temperature sensor, keypad, or control panel. Assuming your control panel is clean and dry, it may be ...
F2 code will be displayed if the thermal sensor is shorted/open. F3 - ( shorted key panel ), will occur if a shorted key panel is detected continuously over 60 seconds. Note: It will take a minimum of
...f2 on display F3 on a Whirlpool microwave means you have a shorted keypad. If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you ...
Question about Spacemaker JVM1640SJ Microwave Oven
...F2 code will be displayed if the thermal sensor is shorted or open. F3 Shorted key panel (touch pad), will occur if a shorted key panel is detected continuously over 60 seconds Replace key panel ...
Question about Spacemaker JVM1640SJ Microwave Oven
...an F2/F3 error. This is NOT a microwave oven I'm refering to, it's the oven in a stove. It's a GE Spacemaker stove model # JMP28GR1A. f3 code temp sensor circuit bad ,f2 oven temp higher 500 ...
...F2-E0 Shorted Keypad Replace Keypad F3-E0 Sensor or Sensor Fuse Open Replace Sensor or Fuse F3-E1 Shorted wire or Sensor locate short and correct it or replace Sensor F3-E2 Oven over heat Replace ...
F2," "F3" or "F4" is displayed. "F2" indicates the oven temperature is too hot and the oven temperature sensor is suspect. "F3" or "F4" indicates the oven temperature sensor or shorted or open. Step 5
...F2/F3/F4The F2, F3 and F4 codes refer to problems with the oven temperature sensor or the keypad. If you see the two-digit F2 code, it means your keypad has shorted and the ERC must be replaced. The ...
Question about JES1290 Convection/Microwave Oven
...F2 shorted thermal sensor (convection models) F3 key panel shorted for more than 60 seconds F4 open humidity sensor F5 shorted humidity sensor There should be a "mini-manual" (technical sheet) hidden ...
...F2 and F3 on my kenmore 30' radiant self-cleaning free-standing range model no. 911.95475790 and the serial no. 7T105893 Hello, This is a failed oven sensor. You would have to install a new oven ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions
