Questions & Answers for: expedition misfire

...Expedition EB runs rough and begins to shake and stall The mech stated that it was caused by a misfire from #3 coil, and recommend chaning all the coil packs. Is there a need to change all the coil ...

2003 expedition 4.6 the engine shakes a lot, I have a problem with the missfires but even when the truck has all the power it still shakes. Can it be a mount? If you have misfires you are not getting ...

Ford Expedition knocks at low RPM and misfires 2000 Ford Expedition starts fine but then misfires and begines to knock.Stops if you are reving at a higher RPM SCRAP IT

...expedition showing a misfire on number 2 cylinder OBD code PO302. Also I am getting code readings PO174 andPO171 system to lean on Bank 1and 2 PO302 is being a misfire, could mean the plug is bad or ...

...expedition and the codes po174 and po171 are popping up, along with po301 and po306 showing misfire. How can I fix that? P0174/0171 are bank 1-2 running lean (insufficient fuel) which is related to ...

...expedition and the other day I took it to auto zone because the check engine light turned on. The trouble shooting said that it had cylinder misfire detected. does anybody what caused this or if ...

my 2003 ford expedition putts and the code on the computer read run to lean and misfire in number 2 Putts and code read running lean and misfire in number 2 defective or clogged fuel injector

2006 ford expedition Cylinders 4,5,6 are misfiring 2006 ford expedition Cylinders 4,5,6 are misfiring with brand new spark plugs and coil packs i have no power locks anymore and no dome lights. the ...

...p0302 cylinder / misfire how do I fix this problem on my 97 expedition That is cylinder 2 misfire,check spark plug,clean throttle body,if its ejector clean 2 or carborator should be clean with ...

misfire on #8 2000 ford expedition misfire on #8 HT lead ok? Spark plug ok?