...expansion tank and radiator for correct level. The radiator should be full (take the cap off when the engine is cold, doing this on a hot engine will cause hot coolant to spray out and possibly cause ...
...expansion tank/reservoir, I would recommend filling the expansion tank to the top remove bleeder screw and allow the vehicle to sit keeping coolant filled to the top of reservoir, once you feel there ...
...expansion tank fitted after overheating and splitting.After bleeding the cooling system it seems as though the bottom hose is not getting hot any suggestions would be welcome NORMALY THE HOT FLOW ...
expansion tank, it is supposed to do this when overfilled. otherwise the tank would explode. I suggest using warm water to flush away the spilled coolant to stop it damaging your underseal and gaskets
...expansion tank, or the cap where you add coolant to the radiator. I have use OEM parts and have changed some of them even twice without even driving the car one mile. I have put two new thermostats ...
expansion tank because of leakage. Maybe the plug must change because this happen 3 times???? I belive the pressure is to high inside the system. The temperature seems good in till the water disappear
Usually answered in minutes!
274 Questions
219 Questions
1 Questions
2 Questions