Questions & Answers for: Xerox exit sensor jam

...exit sensor or faulty/blocked POB sensor. The printer thinks paper is present at one of these sensors when there should not be paper present. Verify that the fuser exit sensor is not stuck Verify ...

...exit sensor or faulty/blocked POB sensor. The printer thinks paper is present at one of these sensors when there should not be paper present Verify that the fuser exit sensor is not stuck If both ...

...holds the paper in the exit roller which creates a paper jam error? Is sounds like your exit sensor actuator has been knocked off. It's not seeing the paper hitting the exit sensor and shutting

...exit sensor. The earlier versions of the exit sensor had this problem all the time because the printer had to heat up in order to get the sensor to loosen enough to get paper by it. Xerox remodelled ...

paper doesn't exit sensor all the way when i copy, paper doesn't exit sensor all the way. says "paper jam open side tray" You need a fuser exit sensor. P/N 120N00487

...from the tray long edge first. and then the fuser exit sensor did not actuate within the specified time. Clean the drawer from dust or oil. if this not solve the problem change the fuser exit ...

...FUSER. WHAT IS THE SENSOR BEHIND THE FUSER CALLED. OR BETTER YET WHATS THE PART NUMBER. KIT EXIT SENSOR (Fuser Exit Sensor Kit) part no. 015K60900 Check out this video, explains that part pretty ...

...and replace the fuser exit actuator. Good luck, and thanks for using FixYa! Look for a small piece of paper or dust stuck inside a sensor in the paper path and make sure the sensor is working

having a paper jam about every 3 or 4 print jobs. it jams just before it exits. is this the paper exit sensor? Its the fuser exit sensor most likely.

workcentre 7335 fault code 012-281 tray exit sensor jam check exit sensor