Questions & Answers for: Toshiba exit sensor jam

...exit sensor actuator is sticking Take a look at the exit Actuator Swiitch on the fuser. Sometimes they get a bubble in the actuator and will stick in the assembly. File off the bublle and be sure the ...

...exit sensor just after the Fuser. That sensor was replaced but didn't fix the problem. Letter size paper feeds thru from any tray with no problem and no jam. using the multipurpose feeder is the only ...

...exit sensor, but the other end of the paper hasn't yet. Because it's jammed... It could just be a regular paper jam that needs to be cleared, or it could be a faulty exit sensor or a faulty ...

causing papper jam @ the exit tray& theexit roollers are not turning may broake the gear or nor function the sensor for him or actuator dont have spring

...test for following sensors.Registration sensor 03-[FAX]ON/[2]/[A]1st transport sensor 03-[FAX]OFF/[6]/[E]2nd transport sensor 03-[FAX]OFF/[7]/[E]Exit area Transfer cover Exit sensor

...might be due to sensor faulty. Perform following input test.Registration sensor 03-[FAX]ON/[2]/[A] Upper drawer feed sensor 03-[FAX]OFF/[6]/[E]Exit area Jam access cover Exit sensor

Toshiba e20 Call for service Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor.

Error code E731 Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor

...exit sensor , it is ok i checked the machine througly during the time of entry of paper in fuser unit it get jam. If your fuser unit is ok, make sure the registration actuator/sensor is not ...

for resolve E030 in toshiba studio 282 what can i do??? E030 jam at exit unit...make sure the exit sensor actuator not broken