Questions & Answers for: Kyocera exit sensor jam

...sensor, and the machine must be taken apart to fix it. 1. Turn the printer off and open the access cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is possible ...

exit sensor face down tray paper full sensor........ easy way to solve this problem is remove Durmunit and toner box and rear unit then clean it useing a blower and refix all the componet and try.....

...exit sensor after the registration roller by the drum was activated. Check the fuser and drum areas. It can be caused by a dirty exit sensor, registration rollers not having pressure, a bad fuser ...

it is indicating the paper jam sign. check the fusing unit. the paper must be inside that unit and its hard to see. fusing unit is the unit before the paper exit unit or from where the paper comes out

HOW TO SOLVE J41 IN KYOCERA KM 1620 This is a jam error code check the exit sensor replace if faulty aparece c-6 400

My Canon IR Runner 3225 keep tellin me to remove paper from exit bin but no paper is there check to see if someone broke a sensor when removing a jam that's the first thing too check

PRINTER First you have to find out where the paper jam occurs. Check the Rollers and the clutches, then the sensor for the registration and finally the exit sensor. Clean or replace any defective part

...sensor is sensing a paper jam because the paper hasn't exited the machine. 4209 - The eject sensor (ES) does not turn on during paper feed from MP tray. ...