Questions & Answers for: Konica Minolta exit sensor jam

...exit sensor flag. If it accordian folds in the fuser then the fuser needs replacing. Fixalot may have hit the nail on the head. Make sure the tray is set for the correct paper size being used. Is it ...

...in paper path. torn pieces, etc. there is a exit sensor in the fuser assy(hot section at exit) there are paper seps. at the roller - dont damage the roller. check to see if actuator is block /

...5-6 pages more and jam again. I would try cleaning to paper pick up rollers incase its not picking the paper all the time i would also check the exit sensor to see if its sticking hope this

I have problem is paper jam in fuser/exit cheak the fuser sensor liver....or Hetter Lower Roller,, or Hetter Teflon/Roller.

jam? If it jams with the paper just exiting the machine then you have a bad paper detection sensor in the fusing unit. This is a somewhat common failure on the Di200 series. If you open the right side

...I would closely examine the exit roller. When the paper fans; it's sticking on something. Typically, stuff will ":hide" on rollers; or maybe stuck on a sensor. Using a good flashlight will

...help me pleas........... the sensor did not sense paper passing through fusing unit. check sensor by the side door, paper exit unit or paper passage clean sensor, change if broken check sensor ...

i have a jam in the doc. feeder which stops halfway as the paeper exits the doc feeder has been cleaned and serviced...sensors etc. model ### of the document feeder and the machine?????

how do i resolve jamming at the tray exit of Konica Minolta 240f service all pick up and exit roller, or check the side door sensor, check of their spring returns.

...exit sensor (PS3) since the paper feeding is started. Causes • Transport motor (M1) • Fusing motor (M3) • Registration clutch (CL4) • Registration sensor (PS1) • Paper exit sensor (PS3) • Front side ...