Questions & Answers for: kawasaki ZX-6R ethanol free gas map

Question about 2005 ZX-6R

1 Answer

Let our Experts solve your ''I have a 2005 ZX6r 636 I have had problems starting it the last 8 months So I took the Power Commander out and it ran fine for a few weeks, Now when I turn the POS on.. ...

Ad

I have a ninja 2003 636. I need to remove all the gas I have a ninja 2003 636. I need to remove all the gas from the tank, how do i do taht? either siphon from the filler, or disconnect the fuel line ...

Ad

i have a zx636 05 with a jardine rt1 exhaust i need a map for the power commander? http://www.powercommander.com/powercommander/default.aspx

...gas in it and am running it off of a remote fuel tank now trying to get the one cylinder to work like the rest? You will need to check the valve clearances and then do a compression test, a valve may ...

Question about 2006 ZX-6R

1 Answer

i just got my fl on my kawasaki zx6r 2005 red light turned on yesterday ... while i was doin some wheelies... and i brouht down,, could this b that im gettin a flat tire on my bike ,,, or is something

Question about 2006 ZX-6R

1 Answer

i have a 1993 kawasaki ninja zx6......it leaking gas from under the tank...and fuel gauge doesnt work You need to check the pipes for leaks or if its the gas tank itself you need to weld it(let it dry

Question about 2006 ZX-6R

1 Answer

f1 light staying on all the time FI stands for Fuel Injection. The fuel system sensors have detected a problem. It could be anything > a dirty air filter restricting airflow, a plugged injector, an

Question about 2002 ZX-6R

1 Answer

gas leak There is gas pouring form the carbs on two spots on the left side. Changed all spark plugs and fluids and cleaned the carbs and cant find the leak. Thinking that the two coil packs are bad so

I have 07 ZX6R No mods,starts fine runs fine,cruises fine. Nail the throttle at any rpm,any gear and bogs. let off and just cruises. bike sat for 4 years and just started riding few months ago, been f

...Gas cap diaphragm valve faulty. 20. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing. 21. Carburetor controls misadjusted. 22. Incorrect valve timing. 23. Valve ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...