Questions & Answers for: kawasaki KLX 250 ethanol free gas map

i have a 2007 klx 250 new battery and it was running fine. now after sitting for a while it will run on choke only! it stall when you give it gas or turn off the choke? also this is one of those bikes

I have a 2006 Kawasaki Bayou 250 it is always fowling spark I have a 2006 Kawasaki bayou 250 it is always fowling spark plugs and it overflows gas back into the air cleaner box What should I look for ...

why is my 2010 klx hard to start when it is warm? why is my 2010 klx hard to start when it is warm? You probably twist the throttle a few times when trying to start it. A power valve squirts extra gas

If we do not start the bikes every week they are very difficult to start - they appear to not get any gas. These are brand new bikes (100 miles) so they should not need servicing. If the batterys seem

Hi there, i have a KLX 250 2007,the problem with this bike is it won't start when the engine is cool.what i do is, i push it to start every morning. I really hope for answer for this problem. pull ...

...gas is coming out then tap float bowl with the handle of a screwdriver. This may free up the float. Otherwise you will have to disconnect the fuel hose from the carb and see if you have flow to that ...

I own a 1980 kawa. Ltd 250 that used to belong to my father. The bike was is 100% condition but a close call made my dad put it in the shed in 83... however none of the fuel or oil was drained and the

1978 Kawasaki KLX 250 won't stay running cleaned carb, new spark plug, fresh gas @ 1. Make sure fuel is freely flowing from gas tank. 2, Take carb to a professional and have him clean and set it - ...

...gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator. 6. Faulty spark plug cables, leaking or broken, internal damage check for spark ...

Can't get my 2006 Kawasaki klx 250 to start Have spark gas and air but still won't start if it is a 2 stroke the problem may be in the crankshaft seals not sealing on the shaft resulting in low ...