Questions & Answers for: Minolta error m1

...is the error code C0000 the Main Drive Motor M1's failure to turn. The lock signal remains HIGH for a continuous 2.0-sec. or more period while M1 is energized. Checkthe main motor or call for

...M1 Call service errors.To remove this error do the following steps.1-Press utility button on panel.2-Now press these buttons one by one, Press Stop, then zero, again zero, then stop,then press ...

error C-5102 minolta C450 displays erro C5102 C5102: Main Motor’s failure to turnRelevant Electrical PartsMain Motor (M1) Mechanical Control Board (PWB-M)DC Power Supply (PU1)Step ActionWIRING ...

reset error m1 in minolta bizhub 1811 no copy Utility button, then stop 00 stop01 then use arrows to get to 9. Clear data, then clear maintenance counter =M-1

error code cof32 C0F32 Faulty ATDC Sensor - The measurement taken by the ATDC Sensor (UN1) at a time 2.0 sec. after the Main Motor (M1) has started turning is less than 5% (greater than 4.63 V). - The

...M1 Call service errors.To remove this error do the following steps.1-Press utility button on panel.2-Now press these buttons one by one, Press Stop, then zero, again zero, then stop,then press ...