Questions & Answers for: error code f22

Question about Duet GHW9150P Front Load Washer

2 Answers

...Error Code I have a F22 error code - clothes in washer - can't open door. Have hit the cancel button twice, unplugged - nothing - will not let me open door - or start another cycle. When I select ...

Ad

Question about Elite HE4 Electric Dryer

1 Answer

...seem to know what the code means, also this error is no where in the manual. just remember error codes are always going to be stored on every machine ,, shoukd not have a problem ,, but does it ...

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...6 month old whirlpoo; wfw9200 with these F22, F28, A17 A27 error codes f22 is a door lock error and f28 is a commication error you still have warranty thorugh whirpool. you're going to need pro. ...

Question about Duet GHW9150P Front Load Washer

2 Answers

error code f22 whirlpool duet wash cycle error code f22 appeared about 30 seconds into whirlpool duet wash cycle- door is looked, nothing happening f22 is a door lock error try this hit cancel turn ...

Question about Duet GHW9150P Front Load Washer

1 Answer

error code. This is an indication of a door latch failure and/or interconnecting wiring problem. The first step in troubleshooting the problem, however, is to unplug the washer for AT LEAST 30 minutes

Question about Duet GHW9150P Front Load Washer

1 Answer

error code F22 and pressure is down nto 0.2 bar can you shed any light please? F.22 Dry fire Too little water in the appliance, water pressure sensor defective, cable to pump or water sensor defective

Question about Duet GHW9150P Front Load Washer

1 Answer

...error code on my washer. Can anyone tell me what this code means. Look at the information below and it should clear up your mystery. F22 DOOR LOCK ERROR A Door Lock Error occurs if the door cannot be ...

Question about Duet GHW9150P Front Load Washer

1 Answer

Error Code Follow-up I had an F22 error code on my Whirlpool Duet Washer. I followed Jeff Rockwell's advice. I eventually ordered and installed a new door latch assembly, and the code persists

...error code, Dryers overheat because of reduced airflow. You need to fix that first. Remove the rear vent completely and check the hose for lint and birds nests. Check the flaps on the wall vent that ...

error code. Replaced door switch nothing changed? Yes it is the Door Switch, or its wiring and where is terminates on the control board. Of the board is faulty. https://www.google.com/search?q=Kenmore

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...