Questions & Answers for: Ricoh Aficio error code 999

...999) are both error messages which are displayed when a sensor does not work normally due to dirtiness. For example, either may be caused by a dirty maintenance unit or clogged ink nozzles. It may be ...

...error code of 990 on a GX5050n inkjet printer. The printer is fairly new with only a dozen or so printouts. Thanks. make sure printer is off. Then old down escape and online button at the same time. ...

error 999 appears on display, how can I fix this problem? try holding down online and escape button at the same time. then turn machine on while still holding down those two buttons. Continue to hold ...

...error 999 when trying to print a document. Hold online and escape button together and then turn the machine on while still holding down those two buttons. Continue to hold those buttons down until ...

cs 999 shows on screen wen turn on your software wont "load" probably need new hard drive

Error message 999 on control panel... turned on and off and still not working. Cleaned an area as suggested on Richo site and still not working. Any suggestions please? BULLETIN NUMBER: J001/J003/J006

...Error 999 appears. When machine starts up, machin... Error 999 appears. When machine starts up machine gives out rapid clicks but does not start. ...

...999 error. I cleaned out the solid gunk, but the error remains. I held the online and escape down while it fired up and it still comes up with the 999 error. It's likely dried-up. You'll need ...

...Error Code: SC390 PrintCopy .info https://printcopy.info > code=SC390 Code: SC390; Description: TD sensor error 1. The TD sensor outputs less than 0.5V, 20 s after the TD sensor initial setting has ...

...Error Code SC 401-00 Copytechnet https://www.copytechnet.com > forums > 108927-rico... May 4, 2016 - On old Ricoh Aficio's SC401 used to be a Transfer error, but on the 240 its ID Sensor, could be ...