Questions & Answers for: Ricoh error 101

...error need to be reset by toggling a dip switch 101-1 while the power is on. Unable to locate the dip switch. Is this the correct procedure or where is the dip switch to complete the repair. There is ...

error is related to lamp , but what should I reallyto make it work ? thanks The E code tyo refer the exposure lamp malfunction.Turn ON the main switch,remove the rear cover and turn the DIP switch 101

Sir, My copier model RICOH MP 2000Le shows error . ADD TONER & some time it shows SC 302 sc 302 - charge roller current leak. strip the drum unit (dmu) and clean the unit My copier model RICOH MP ...

error sc 101 SC101: Exposure lamp error ricoh 2022 error sc 101 coming how ca i solve this problem

error code 101 need reset thank Exposure Lamp Error Symptom: The standard while level was not detected properly when scanning the white plate. Possible Cause: • Exposure lamp defective • Exposure lamp

sign E is shown. look my friend e means that error code press on numbers ./* in circle then revealed number like e-101 that examble

sc 101 sc101 ligne sur papier Exposure lamp error.Verify the exposure lamp and the expo lamp thermistor.

sc 101 aficio 7001 Problem with exposure, Exposure lamp error - White plate, glass, DF belt, mirrors or lens are dirty

...101 error code in rocoh prenter modele pro 906 ex? Exposure Lamp Error The standard white level was not detected properly when scanning the white plate. • Exposure lamp defective • Lamp stabilizer ...

...error code 101 / SC101 is an exposure lamp error or the SBU board is defective. It can also mean the standard white level on the glass was not detected properly. Also, check if the scanner is blocked ...