...EOC(Electronic Oven Control) Version 4 Failure Code ConditionCheck/Repair F1Circuit board defectiveReplace control board F2 1. The oven temp has risen above 665F and the door is not locked or 2. The ...
EOC) board controls all the features of your oven. Since the display is no longer present, and the oven does not work, I think you need to replace the EOC. A replacement can be purchased at any of the
...EOC) board on your control panel. Even though it is a gas range, the igniters for both gas manifolds in the oven are electric. They are controlled by relays on the EOC. If BOTH oven features stopped ...
Question about Elite 45986 Front Load Washer
...Recommended action: Test harness/connections P4 (EOC) & P11 (Surface Element Control Board). If harness checks OK, failure can be caused by faulty UIB, surface element control board, or
...board & EOC(main computer board) 1. Test the harness and connections from EOC connector P16 to oven relay board J2. 2. Replace the oven relay board. 3. Replace the EOC.1. Test the harness and ...
Question about 95592 / 95594 / 95595 / 95599 Electric Kitchen Range
...model: Part#316217001 If that checks good, then your EOC control board is the problem. Here's the EOC Board for your model: EOC Board - Manufacturer's Number: 316418207 I hope that this helps. ...
Question about EW30ES65GS 30" Slide-in Electric Range with 5 Radiant Elements, 4.2 cu. ft. Self-Cleaning... Range
...the control board and electronic oven control. 1. Test the harness and connections from EOC connector P16 to Oven Relay Board J2. 2. Replace the Oven Relay Board. 3. Replace the
Question about TGF320 Gas Kitchen Range
...Board, or EOC. Check harness and connectors from the EOC to Mini Oven Control Board. Check for 15VDC to Mini Oven Control (red and gray wires). If harness and voltage are good replace Mini Oven ...
Question about TGF320 Gas Kitchen Range
...to access and replace the EOC. Here is the lockout board if you need to order it. Here is the EOC board if you should need it also. All parts come with a 365 day, any part, any reason return
...EOC board or cooktop lockout board is faulty. This type of diagnosis will require using a volt/ohm meter. If you decide to check the harness to the boards you will need to remove the back panel for ...
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions