Questions & Answers for: Ford Explorer enter code

Question about 1998 Explorer

1 Answer

the factory code also. First enter the factory code (5 digits), then press the 1/2 button, then enter your own 5 digit code. You can use either code now, but there is noo way to erase the factory code

Ad

Question about 1997 Explorer AWD

1 Answer

...door to the ford explorer? you enter the permanent code on the plastic card in the owner manual packet. Then hit 1, enter your 5 digit personal code, hit 1. owner manual should have directions

Ad

...code. Enter each digit within five seconds of the previous one. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your

...code or enter a new code. BEHIND DRIVER DOOR PANEL OR RIGHT SIDE REAR TRIM PANEL LOOK AT PASS SIDE REAR DOOR OPENING AND PULL REAR TRIM OUT THERE its a five digit code To erase any personal code set ...

Question about 1996 Explorer

1 Answer

...Enter the factory set code. 2. Within 5 seconds press the 1-2 key 3. Enter your personal 5-digit code. Each number mus be entered within 5 seconds of each other. 4. Doors will lock and then unlock to ...

...code: 1. Enter the factory set code. 2. Within five seconds press the 1-2 on the keypad. 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other. 4. Press ...

...enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. FORD KEY PADS/REMOTES Insert key, turn ignition off-to- on eight times in ...

Question about 2007 Explorer Eddie Bauer

1 Answer

enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE) KEY PADS/REMOTES Insert key, turn ignition off-to- on eight times in

Question about 2001 Explorer

1 Answer

...code Enter the original code on the keypad. Press the 1/2 button within 5 seconds of last digit of permanent code. Enter new 5-digit code do not exceed 5 seconds between entering digits or between ...

Question about 1997 Explorer AWD

1 Answer

...that compartment you will see a white box. Your factory 5 digit entry code is printed on that box.to add a new code-enter the factory code-immediately push the 1/2 button-immediately enter you new ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Manuals & User Guides

Loading...