Questions & Answers for: Nissan Altima engine timming

Question about 2004 Altima

1 Answer

outting timming belt can you send a picture how can i out a new timming belt for altima 2004 altimas have timing chains no belt replacement needed (both have chains 2.5 and 3.5 engines)

Ad

...more freely through the engine heats the oil) CHECK TIMMING BELT TENSIONER SLACK USUALLY BREAKS AND IT MAKES A LOT OF TICKING NOISE WHEN CAR IS WARMING UP ,NEED TO REPLACE TIMMING CHAIN AND ...

Ad

Question about 2005 Altima

1 Answer

...change fuel pump, filter and plugs also tempture switch,sending unit, new timming chain sete.this engine was doing the same before it was over haul. 94 NISSAN ALTIMA GXE check your fue ...

Timming Chain Noise-Nissan Altima-1995. I own a nissan altima,1995 with 305,000 kms odometer readings. Recently this car which otherwise was running fine, has started to give problems.Some of the ...

Question about 2000 Altima

1 Answer

timming belt busted in my cd17 and engine is lock what could be the damage Valves are all bent. The piece of timing belt is jammed and locking your motor up. Replacing the timing belt isn't really ...

...the cylinders on the opposite bank) hopefully this helps a little one of the 2 sensor on top of engine that control the fux of oil at timming its that or this It's off a tooth on the timing chain ...

Question about 1999 Altima

1 Answer

...timming belt is good fuel pump is good the fuel pressure regulator is also good i'm not understanding why it will not start it turns over like it wants to start but it just want crank please help mr. ...

Question about 2002 Altima

2 Answers

...me know if that solves the problem, I have feeling it will, thanks mike from fixya. if your check engine light is not lit, then I would start will the fuel filter as it is the cheapest and easiest ...

if timming chain on 2007 2.4 nissan 4 cyl will it dammage the engine will the pistons hit the valves? If it skips a tooth or 2...yeah it will damage the engine.

...TIMMING CHAIN AND TENSIONER ALSO CAM SHAFT POSITION SENSORS BANK 1 AND BANK 2 IDLE RELEARN Wheel nuts loose, or stones in hub caps, do you get the noise rolling down hill ? , if not its engine, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,587 Questions

2003 Nissan Altima
2003 Nissan Altima

1,450 Questions

2002 Nissan Altima
2002 Nissan Altima

1,306 Questions

2001 Nissan Altima
2001 Nissan Altima

569 Questions

1995 Nissan Altima
1995 Nissan Altima

534 Questions

Manuals & User Guides

Loading...