Questions & Answers for: Chevrolet S 10 engine timming

timming comp. mark pully at T.D.C (top dead center) and crank engine. adjust distributor till #1 and #4 are within hash mark 0 on top of pully. not positive how to tell it the best way but tried. that

...timming? Yes, but I doubt you will want to spend the money on the software to do this. Timing is set in the computer, and automatically advances and retards based on feedback it receives from its ...

...going it stops. we have changed the spark plugs and it hasn't helped . what could be wrong with this? HELP!!!!!!! Check the timming on the engine. If your timming is off it will not run good at ...

...engine is cranked its getting spark out of coil and even tried ether but wont even try to run please help ok if it wont start on starting fluid you either have no spark or you have internal problems ...

cant get to freeze plug do i have to pull the engine on my 91 s-19 to replace the freeze plugs? No you do not have to pull engine,But you will have to pull manifolds and maybe starter depends on ...

timming needs to be ajusted Some of the newer engines have that new computer timing feature. You can not set them by the distributer like the good old days. Is the engine trouble light on? That is ...

...TIMMING ON THE CAP ?, AND WHERE DOES IT START SITTING IN THE CAB OF TRUCK ? Chevrolet only used a 2.8 liter engine in that vehicle for that year, here is a diagram for the 2.8 liter engine and I hope ...

...fuel gage as well as a new sensor for the evap unit. the problem is that after 2 days the service engine light comes on and the code is 440. I replace the fuel cap wth a new gm fuel cap and reset ...

Where is the Fuel pressure switch located on a 1996 S-10 with the 4.3 Vortect engine??? ON THE FUEL RAIL NEXT TO THE INJECTORS. TIM

2003 sebring sedan in hot weather or when going an incline of any kind engine light flashes, car just slowly makes it to 30, even though pressing gas pedal to floor. car shutters and bucks several tim