...switch off/engine keeps running/help got to work, turned off ignition switch, engine kept running. Re-inserted key and turned switch off again, engine stopped running. Engine seems to be running fine ...
...switch to off the engine continues to run..I have to pull off the spark plug wire to stop the engine. Locate the wire to the kill switch and inspect for disconnected or damaged. If not... locate its ...
Question about 21 HP 42 in. Zero Turn Tractor Mower - CA Model
...switch with an ohmmeter. If the engine does not die, then you have mechanical drag. With engine off and the belts taken off, turn each spindle to find out if one is frozen or binding. Good luck! A ...
...level. The switch is mounted on the oil pan. Hope this helped (remember rated this post). Hi,you can look at this picture ,it can help you know the location of Engine Oil Pressure Switch on car
switch-3.0L engine Fig.: Oil pressure switch (sending unit) schematic The low oil pressure warning lamp will illuminate when the ignition switch is turned to the ON position without the engine running
...switch into the engine. If resistance is felt at all, remove the switch and inspect the threads for any damage. Continue to install the switch. Once installed tighten to 11 ft. lbs. (15 Nm). If ...
...switch for the engine fan. with the engine off and the battery cables disconnected from the battery - replace the switch. if the ( "sparks near the switch") is the fan switch check the wires when you ...
Question about TimeCutter SS5000 zero turn mower
...engine dies get a new ignition switch and safety switch for your deck I would look at the ignition switch first to see if it is working right and that all the wires are on it. There seems to be a ...
Question about TimeCutter SS5000 zero turn mower
...plug to the seat switch. If you can start the mower, disengage the parking brake, and engage the mower blades (with your other switches reconnected) without engine shut down, replace the seat
Question about TimeCutter SS5000 zero turn mower
...switch. Start the engine and check the oil pressure light operation. If the light stays on with the engine running, stop the engine immediately to avoid severe engine damage until the cause of the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions