Questions & Answers for: engine subframe

everything off the engine and lower the subframe. Or you can seperate the trans away from the engine, hold the trans up (GM makes a support bar) and pull the engine up out of the compartment. Have fun

...subframe should be free! Remove the nut and bolt that secures the lower engine mounting to its bracket (the bolt that goes through the big round rubber mount at the back of the engine) Disconnect all ...

...lower left side of subframe 4 to 6 inchs, go to engine support and lower engine and transmission down just enough so that transmission side pan can be removed. Thanks and good luck with your

...subframe you need a engine cradle bar to that attaches to the engine under the hood and rests on shock towers and front of radiator holds the engine in place for subframe and trans removal. this is a ...

subframe and engine and lower the car. 13) put the nut on the top of the motor mount and tighten. 14) check again to make sure all is well and your done!These are the steps I took to replace

Engine Mounts and the Subframe is in turn bolted to the uni-body of your car via Subframe Mounts. its the frame under the front of your car that cradles the motor and also allows for the lower part of

where is drain plug for engine oil in z4 OIL DRAIN PLUG IS ON THE BOTTOM OF OIL PAN JUST LOOK UNDER SUBFRAME UNDER THE ENGINE THE OIL DRAIN PLUG IS IN THE SMALL OPENING UNDER SUBFRAME.

engine is still in the vehicle, remove the subframe. -1 Attach the chain hoist to the engine. -2 Disconnect the suspension lower arm ball joints. -3 Remove the rear mount mounting bolts. -4 Remove the

...my subframe on my 2000 pontiac grand am se2. my main question is when remove the subframe does the engine fall or move enough to were i should worry. The engine will fall out unless

...subframe please. If I remove engine mount and rear mount which is connected to frame. Engine and mission will be dropped? I want to know how to remove and replace it correctly? I have jack lift Jack ...