Questions & Answers for: Chevrolet Venture engine overheat high speed

...engine after 15 minutes is overheat and the fans are off. Fifteen minutes! you have bigger problems than only the fans the fans are controlled by a thermo switch that is heated by the coolant, If you ...

...engine soon) light is on. It wasn't on before I did the oil and filters. I' ve checked all connections and fluids... what did I do??? If ou fixed whatever happened during the oil change, the light ...

high speed at all settings. The rheostat kind mess up when the nichrome wire gets burnt out and you end up with may a fan that works only on high, or maybe wroks only on medium and high vice versa. So

...high it gets cold. This indicates that enough hot water isn't getting from the engine into the heater core at a fast enough pace to keep up with the increased demand when you have the fan on higher ...

HEATER FAN CONTROL DOWN TO 2 SPEEDS HEATER FAN SWITCH ONLY HAS THE TWO HIGH SPEEDS WORKING. IS IT DIFFICULT TO CHSNGE THE CONTROL? The control is not the problem. Your blower motor resistor is burnt ...

...engine did not overheat did you feel that the cyclinder heads needed replaced?.has the engine high milage?was it loosing water?.if i was you i would bring it back to the dealership that done the work ...

...AT ONE OF THE CODES.TRANSMISSION GETTING TOO HOT.DUE TO OVERHEATING ENGINE OR YOU ARE TOWING OR PULLING MORE WEIGHT THAN YOUR VECHICLE CAN HANDLE.CAUSING ENGINE AND TRANSMISSION TO

...high speed when engine is getting hot You could have one motor that is getting bad in it. Next time this happens try unpluging one and see it the other speeds up. If it dont then try unplugging the ...

engine to overheat and damage the engine.

The thermostat can be stuck close. If you feel the upper hose very hot and the lower hose cooler than normal, it may be a stuck thermostat.

Make

Why is oil coming from carb? First of all, It is called a THROTTLE BODY. High speed driving is usually the problem. high klm. equals worn engine like valve seals and or blocked PVC valve.