Questions & Answers for: Mitsubishi Eclipse engine misfire

engine start again with the misfire every these misfired happen just when the car is not running when the car is running i got no trouble,just is when the car is stopped could you help me please? does

...misfire..put new plugs and wires but check engine light is still on. i got it checked at autozone and the computer still said the same thing,misfire in 4th cylinder. There may be a problem with the ...

...engine skip no nothing. What could be causeing it to read misfire cylinder 3. Is it possible that it just had bad fuel go through the system from sitting and to try and put some fuel injector cleaner ...

...misfire too from the cylinders. An engine that hesitates, stumbles or misfires when accelerating or when it is under load is an engine that is either sucking too much air, not getting enough fuel or ...

...misfire after it has been driven for about an hour or so! after the engine really warms up the rpm gauge will spike slightly and the car will shutter a little bit and it slowly get worse the further ...

...engine code P0301 pd (misfire in cylinder 1). I've put in new spark plugs and wires and the fle injecter is working fine and its still misfiring. Could it be the ignition coil that's cousing only ...

I got a 2002 eclipse engine light is on took it to auto zone to get it checked but when they plug it up it gets no reading was told by a customer that there is a fuse to it wanted to know if that was ...

...ENGINE LIGHT FOR SPARK PLUG MISFIRE, AND I DONT KNOW IF THAT HAS ANYTHING TO DO WITH IT, I WILL CHECK MY EGR VALVE TODAY, BUT EVERYTHING ELSE ELECTRICAL IS WORKING, AND I'M ALL THE WAY ...

...ENGINE MISFIRE There are few possibilities that can cause engine misfire issues. It can be issue with spark plugs or faulty spark plugs. Also get the compression test done for cylinders. If any of ...

misfiring engine how do I fix my car from misfiring Well the check engine light should be on and there should be a trouble code stored in the computer for the cylinder not producing power. Once you ...