Questions & Answers for: Jeep Wrangler engine misfire

code scan: P0301 Cylinder 1 misfire detected 2004 Jeep Wrangler 2.4 liter. about 36,000 miles.the engin malfunction light came on. went to Checker auto an used their code machine. Code P0301, what ...

engine keeps missing. unknown codes 1998 jeep wrangler 2.5L 4cyl check engine light is on codes 1682 1391 0320 engine has been misfiring alot Code 1682 indicates low battery voltage. This could be a ...

misfire, 171 is burning to lean, and 473 is fuel center system sensor? mechanic could not clear check engine light. we just changed plugs, wires, distibutor cap and rotor button. he said he did not no

...engine light comes on, We had 105 degree days lately. code says misfire on cyl #2. replaced three injectors on cyl. 2. Also has new Autolite Platium plugs. When the engine is cold no misfires. when ...

...engine light and code p0302 cylinder number 2 has a misfire P0302 means number two cylinder has a misfire, due to possibly a spark plug, spark plug wire, ignition coil, fuel injector or something ...

...engine code P0301 P0301 - Cylinder 1 misfire detected........P0302 - Cylinder 2 misfire deteced, and so on........so either it is a current misfire, which you would be running on 4 cylinders instead ...

engine and it will rich misfire, idle rough, and be difficult to start warm. The ECT has two wires going to it and is dedicated to sending information to the engine computer. It has nothing to do with

...5 cylinder changed the plugs saying the same thing. dont no what engine but...checking for a good blue spark & plug wire would be 1st if fuel injector gets clogged will also cause misfire good ...

...Engine Misfire diagnosis can be complex and there are many reasons for misfires to occur. I suggest you read the article at this link that deals with engine misfires and the diagnosis of them and ...

...engine light still comes on and its says same thing when diagonist.. Are there any driveability issues, can you feel the misfire? Just about anything can cause a misfire, did you visually check for ...