Questions & Answers for: engine malfuntion light

Engine light on Can you recommend a "reasonable" location for tune-up? The engine light has nothing to do with a tune up be needed. it happens with this model alot... i would chech to make sure the ...

...through a puddle,now the malfuntion light stays on and the engine missfire at high revs spray all the electrical system with WD40 and add a couple bottles of gas line antifreeze to your gas tank ...

...malfuntion engine light came on,had it scanned,scanner said evaporator vent malfuntion. suggestion was made to r&r fuel cap,heard this was a problem on certian other cars,replaced cap,cleared ...

...MALFUNTION - camry 2002 Not fuctions for all indicator while start the engine. This thing happen 2 weeks before. I try to unplug & plug in again "most" cable plug(2 sets of cable, 1 control all ...

check engine light if your check engine light is on a sensor has malfuntioned and you need to go to a garage to scan it to find the problem for a repair to be done

mazda 5 using excessive gas 17mph in city 20mpg hwy engine light on 2.0 engine codes found p0126 p0442 p0661 are all these related to excessive gas usawge check the O-2 sensor for malfuntion also..

...engine the car is starting and running fine aperently a sensor has detected a malfuntion somewhere..the autoparts stores can check with a codereader to see whats up..there is usually no charge for ...

...engine systems failure and transmission malfuntion but car still drives normal You have a check light on Never had one of those before? Not checked for codes & googled them to see the system with ...

...malfuntion indicator light stays on in my chrysler 300c 2010 If you mean the check engine light, you have to get the computer scanned for trouble codes, then after the repairs are made, the codes are ...

...engine malfuntion light came on about two months ago it gave me a code that the camshaft position sensor was bad replaced both sensors car ran great now the engine malfuntion light came on it gave me ...