Questions & Answers for: how to engage 4x4 expedition

...Expedition, 5.4, Eddie Bauer, 4x4, dash indicates 4wd Low range. 4wd not ingaged or intended to be. Acceleration acts as if 4wd is engaged. 5.4 litre petrol ??? recycle it and get a nice little ...

...4x4 LOW) is selected while the vehicle is moving, the system will not engage. This is normal and should be no reason for concern. Before 4L (4x4 LOW) can be engaged, the vehicle must be brought to a ...

...be spinning. Do they? YOUR PROBLEM IS THE FRONT DIFF. ACTUATOR, THIS WILL ALLOW THE 4X4 TO ENGAGE..YOU CAN PICK THIS UP AT ADVANCED AUTO PARTS FOR ABOUT $100.. HOPE I COULD BE OF SOME

4x4 does not engage 97 expedition - I am able to turn the 4x4 switch to AWD, 4H or 4L, th einidator light comes on, but the 4 wheel drive does not engage. I detect no clunking sound when attempting to

...4x4 light to stay on yet not engage 4 wheel drive in high or low range? It is a 1999 Ford Expedition 5.4 V8 auto with auto 4 wheel drive. stuck 4x4 sensor?? just disconnect the wire. you will get the ...

...with the 4x4 electic motor mounted on the transfer case. In most cases if you tap on the transfer case motor when trying to engage 4x4 it will start to work. This is most likely if 4x4 is seldom

won't shift into 4wd 4x4 light comes on and stays on does not engage in to 4x4

...engage but the 4x4 remains illuminated and I am sure it is not in AWD where I usually run it. I had the battery disconnected for approximately 5 months as this is a seasonal vehicle. I am thinking it ...

...lights blinking will not engage check the 4x4 vacuum hoses. if they are in good shape could be 4x4 switch on the transmission. check the 4x4v button as well and always start with cheapest fix

4x4 don't engage. 1997 expedition eddie bauer It was working intermittently then it stopped. I tried engaging 4x4 in both drive, parked and reverse position 4x4 emulator motor check all fuses fist but