Questions & Answers for: Dodge Neon never ends

front end shimmy over 60 miles per hour If I drive over 60 miles per hour, the front end shimmys its going to be in the alignment...have the front end realigned If you are experiencing a "shimmy" that

...front end drivers side mostly and knocking sound like somethings lose Check for a bad tire, tie rod ends, ball joints, cv shafts. i have a 1997 dodge neon front end pop when i turn left or ...

how to replace 1996 dodge neon cv joints Remove the wheel and the lower ball joint from the spindle. It will also make it easier if you remove the tie rod end. There is a large hut at the tire end of ...

I have a 2000 Dodge neon, and I need a Passenger side front inner tie rod. How do I know if mine is a firm feel steering or non firm feel, because those are the two different types of tie rods I can ...

where is camshaft position sensor lacated at the end of the camshaft, left (drivers) end of the valve cover. easy to get to.

how to fix a sagging car door neon Here's an old body and fender repairman's trick: Use a 4-foot length of 2x4 lumber to carefully pry up on the bottom of the door. The best way to do this is to place

How hard is it to replace a outside tie rod end on a 95 dodge neon and how. take the wheel off, there is a nut on the tie ron locking the tie rod end in place loosen this up (only break it free do not

2002 Dodge Neon Very front end is totalled (bumper, hood, radiator, manifold). looking to replace it all. everything is bent and twisted. what all parts do you think are most crucial that need ...

how to change a camshaft position sensor on 2000 Dodge Neon its located at the end of the camshaft, (drivers end) at the cylinder head. easy to replace. once you have the new one in your hand, you ...

How do I replace the CAM sensor on a 1996 dodge neon? it will be on the left hand side at the end of the valve cover on the head. Hi, my name is John I will do my best to assist you. To Remove ...