Questions & Answers for: embroidery unit janome

...embroidery unit to the left a couple of inches and to the back a couple of inches. Don't force it if it won't go. Turn on the machine and see if it will reset. If does everything should be okay. If ...

...embroidery arm is bent, that will jam the unit as it trys to move. If is bent you may be able to straighten my bending it gently. The arms get bent by tilting the machine to the back while the arm is ...

...embroidery unit is unplugged if you r trying to sew and check the bobbin winder to make sure it is off. Also look for thread in the guide, these machines are very sensitive and when the slightest bit ...

...unit goes through the diagnostics correctly. 1 Turn off your Janome MC8000. Wait for a few seconds. 2 Press and hold the "Start," "Reverse" and "Auto lock" buttons at the same time. 3 Release the ...

...embroidery unit. When doing applique the satin stitches do not cover the tackdown stitches. I've tried several designs, all by quality digitizers and all the designs are not covering the tackdown ...

...Embroidery machine with a RCS unit. I can not find anything in my Instruction Book for the problem. The bobbin ran out of thread but the machine kept stitching. I need to know how to back my stitch ...

...not vertically when tracing a pattern size. Sounds like your embroidery unit may have a bad motor or broken drive belt. Get that unit into a repair shop. Cheers, Kelly San Diego, CA Embroidery ...

...embroidery unit. From use, they can become glazed, slick and then they squeak. If it squeaks when you are doing either, it's more than likely an internal lubrication of the machine that needs to be ...

...Janome America World Easiest Sewing Quilting Embroidery Machines Sergers Try contacting some of the online sewing machine vendors (Sewing Machines Plus, Sewing Parts Online, etc). They may be able to ...

The RCS Unit powers on but I cannot use any functions. When you press the buttons, nothing happens Inside the machine there are many parts that have wires connected together. If one of them have been ...