Question about 91112 / 91114 / 91117 Electric Kitchen Range
Kenmore Electric oven 91141065791 My electric oven will show a F5 error, I can clear it and rest the temperature sometimes the error goes away - other times it comes right back. Every once in a while ...
Question about Freezer 20.3 cu. ft. Frost Free Upright Freezer
...both resulted in the heating coil heating. So, he is convinced that it is the controllers in the electronics that is malfunctioning and not telling the heating coil to defrost. This results in ice ...
Question about 40494 / 40495 / 40499 Electric Single Oven
my kenmore electronic stove is having a beep with code F1 on the screen . please help!!! thanks, Please use the chart to determine which stove you have. You will have to look at the model number. The ...
oven too hot your thermocouple is defective or the signal to the electronics(if its an electronic oven) is defective,or the electronic board is bad
66993 pizza oven microwave oven combo pizza oven not heating error code f1 microwave part works Hello, please use the chart to determine which stove you have. You will have to look at the model number
...a fault code shows, it is because something happened but is not necessarily still a fault, yet the electronics is not set-up to recognize whether the problem still exists. You need to remove the
Question about 79012 / 79014 / 79019 Gas Kitchen Range
I have a Kenmore Elite Gas Range. #790 series. The electronics of the oven seem to be working, but the oven is not getting hot. The stove top (surface) is working. Do you think it is the pilot light? ...
Question about 40494 / 40495 / 40499 Electric Single Oven
my oven when turned on goes to F1 and the heat is like broil...only the top burner comes on???? Hello,Please use the chart to determine which stove you have. You will have to look at the model number.
Question about Elite Oasis 6809 Electric Dryer
...dryer to hinge open and remove console. You'll see three electronic assemblies; the machine control electronics, the motor control electronics, and the user interface electronics. Visually check the ...
the electronic control does not work any longer. I have to plug/unplug the machine to make it work. Do I have to change the electronic control? Hello, the answer is yes. You have to change the ...
Usually answered in minutes!
395 Questions
185 Questions
149 Questions
93 Questions
67 Questions