Questions & Answers for: Minn Kota electronic foot control

...foot control switch I have a Minn Kota Terrain 65 Lb Trolling motor thats started to continue to run after releasing the foot control. It appears that the switch is a sealed unit. Is there something ...

...foot pedal. Replaced it and I still have the same problem. Help..... There is a good chance that the control board is bad. This is a common problem with these units. I have replaced my control board ...

...foot control .....I think so ;) Here's a schematic, complete with wiring diagram: Maxxum 70 Bowmount Best of luck! Mike Lost power to trolling motor. Fuses are good, and am getting power to the plug. ...

...foot control was bad because it would only turn one way. got a new foot control, now it will turn both ways but the prop won't run. Dealer says that my electric board is bad. What your take on this. ...

...You should only use the MOM (or momentary) setting when using the push button the foot pedal. Con will just keep the motor running and your foot control will only allow for direction and

FOOT control, here's your schematic: Max 55 if this is it, I would first point to the foot pedal and/or the pcb control board. Best leave this one to an Authorized Service Center, here's the link with

can i convert my bow mounted mini kota 40 to a transom mount? No you cannot. Due to the hard mounted foot controls, it has to stay a bow mount.

55ap speed wont slow down ordered new foot pedal and still wont change speeds any idea what could be wrong Probably in the control board in the foot pedal unit.

i got a minn kota power drive its 24v and i dont know how to wire it to my batterys in series

...foot control doesnt work all the time when I push on the raised portion of the button sometime it comes on most of the time it doesn't and I have to put pressure all over the switch to get it ...