Questions & Answers for: Ford electrode

...check and adjust the spark plug gap. When using a gauge, the proper size should pass between the electrodes with a slight drag. The next larger size should not be able to pass while the next ...

...in the Cylinders of Gasoline Engines. A High Voltage is required to Jump the Gap between the Center Electrode and the Ground Electrode(s) typically between 30,000 and 100,000 Volts with electronic ...

...dont think its plugs, but you can remove and use small wire brush to clean them. check the plug electrode colour to see fuel burn pattern on cylinders, should be lite brown deposits on

...to say that the threads are in place but the porcelain failed due to a incorrectly application the electrode has been bouncing around in the cylinder damaging the head and valves. 3. As for the ...

#2 missing changed out plug wire is firing. is it the coil pack #2 cylinder miss firing I would check the spark plug condition and electrode gap.

Oil on the spark plugs. Whai could be the problem? Need more info but you mean, oil on the electrode or just the outside, IF outside you have a leaking valve cover gasket at the spark plug hole seals,

...manual says. Pull plug three and see what it looks like: fouled (dark oily residue, bent electrode, etc. If electrodes seem worn from use and mileage, replace plug--you'll see scooped ...

...plugs? could be fouled by normal wear, improper application/plug gap, oil fouling (oil residue on electrode) caused by bad valve guide seals or bad piston rings or gas fouling(electrode wet with

what s the spark plug gap for 4.0v6 ford ranger edge? Ask a mechanic he should let you know with no charge to you. they have that information. Or, check with an auto parts store. Could be marked ...

...with that size wrench and a gapping gauge for checking the air gap between the firing pin and the electrode at the base of the plug take off 1wire at a time and turn the ratchet counterclockwise to ...