Questions & Answers for: egr passage

...EGR passage, Valve clearance out of range. Pull vacuum on egr valve with engine idling and see if engine stumbles and tries to die until vacuum is released. If this DOES NOT happen the egr exhaust ...

Ad

...EGR air passage tube? ===== Check for vacuum leaks on intake manifold, the air tube between the air filter. intake manifold vacuum hose. === clean throttle plate with Berryman carburator cleaner SEE ...

Ad

...EGR passage (small tube) are the REAL WORKING parts. The carbon inside the EGR passage tube and the underside of the EGR valve must to clean out. Make sure you has a NEW EGR gasket before you start ...

Question about 1995 Jimmy

1 Answer

...egr valve and clean the passage way. Un-pluging the egr and taking the two 10mm bolts out of the egr valve. You can the use a pipe cleaner and carburetor cleaner to clean the passage way out of the ...

...honda odassy 2001 having engine and TCL light on, been dignosed by michenic by 1401 code and clean EGR valve too, still engine and TCL light is on. what to do ? TRY CLEANING EGR INTAKE OR EXHAUST ...

# 2 cylinder misfire i changed # 2 injector plugs wires roter egr light is still on does the vent breather have any thing to do with this problem nissan frontier 2004 xe Is this the 2.4L? If so, I bet

Question about 2004 Frontier

1 Answer

...misfire no rough idle excelarets fine no loss of power i changed # 2 injector roter plugs wires egr turned light off it came back on after a frew miles Is this the 2.4L? If so, I bet the Exhaust ...

Question about 1999 Rodeo

1 Answer

code says bad egr valve replaced still throws code V6? 4cyl? what is the code? there is no code that says "replace egr valve", the passages may be stopped up. open the egr valve manually (a scanner ...

...EGR passage clogged - Faulty EGR Vacuum Modulator Valve - Faulty EGR Valve - Faulty EGR solenoid valve - EGR solenoid valve harness is open or shorted - EGR solenoid valve circuit poor electrical ...

I have a 2000 Impala LS 3.8 with a recurring P0401 insufficient egr flow code. Originally had pintle position error code. Pintle was sticking. Replaced egr valve, no more pintle code, but soon set ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...