Questions & Answers for: Rinnai ee error code

...error code EE 22 Toyostove Laser 30 will no ignite or do anything, it just reads error code : EE 22 . this is onle 1 yr.old , had little use, any solutions? EE-22 means that the unit has tried three ...

...EE 8 means there is a problem with the blower fan. It could be faulty or it could just be stuck. Did you leave the heater off for a long time? Like all summer? If so then it is probably just stuck. ...

ee 12 code what does this me4an and how do I fix it? Hi alaskasteve, My business is Laser Heating Service in the North Pole/Fairbanks area of Alaska. EE12 is the error code for overheating. Most ...

...error 6 code. I notice when I cleaned out the heat exchanger (yesterday )that some of the stainless steel tubes were plugged up. I cleared out the tubes I could get to, I imagine I'll need a new heat ...

...Error -replaced with a new feul line -worked great for 1 week and now I have to reset each time it cuts off at night. Many nights of cold weather near 7° and the highs for the week 32°. ...

...error code EE 8. what is this and can it be repaired? The blower motor is not working properly. Turn the stove off and remove the front cover. Remove the lower baffle in the front. Remove the black ...

...error code is generated. It ran fine before servicing- this was just for preventive maintenance. We have checked the fuel line to make sure it is not clogged or kinked. Our downstairs heater is ...

error 2 ee 2 is the code for no ignition. This can be caused by a dirty fuel filter or dirty fuel strainer. The flame rod may need to be cleaned. The igniter may be burned out. Could also be a circuit

...EE 2 can be caused by a couple of things but is usually a fuel issue or a flame rod problem. The circulation fan will not come on until the burner has warmed up. The combustion blower should start ...

...error code EE 5 and I can't find any info on that particular code. Help? Error code reads EE 5 and the power button won't turn it off, the reset button does nothing, and unplugging / re- plugging it ...