...Edges of Paper Black streaks from toner on edges of paper when printing. About 1 inch wide on left, and just a trace on right. Can this be fixed or is it time for new printer? This can be one of two ...
Question about Designjet 5500 (42 in.) InkJet Printer
...paper has not been cut square then pull it out far enough that it reaches the spool and line the left and right edges up with the roll and also the blue line. step 5 Lower the window and the handle. ...
black marks along the edge of paper I have gone through all the maintenance steps and I'm still getting black marks along the right side of the paper. there is probably ink on the rollers. get some ...
...black prints 2" from right edge of paper starts 1" wide pale (almost not visible) stripe from top to bottom on black prints. Same vertical pale stripe 2" from left edge of paper 1/2" wide. Color ...
...paper through and then guide it back so that the lead edge just barely shows up, below the small, black rollers in the main print area. Now lock it down and reboot the system. Once the print head ...
Question about DesignJet 1055cm InkJet Printer
...black onto. Everything seems fine, the printer starts to load the paper and do its thing, but then it says that it can't find the edge of the paper, and then just gives up, now what do I do?...... I ...
...paper clip and expand both edges so they are sort-of straight Hold the cartridge upside down and press the paper clip edge into the nozzle hole Move the paper clip edge to and from making sure you do ...
paper? if so either the black drum unit or the belt has gone bad. if the lines stop before the edge of the paper it could be on the print job itself. go through the menu and look for demo pages or the
...paper straight. The black line is the gap created when the edge of the gap has a gap along the edge. * Adjust your feed bars so that it holds the paper tightly centered to the ADF. * Check that there ...
black on hp laserjet printer Appears to be toner residue on left edge only, flakes off paper but leaves dust on paper Fuser teflon sleeve got damaged, replace it.. (only professionals can do
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions