...edge of the PSU (see figure below). Use 1 Jumper to short CN2012 on the lower left part of the Logic PCB (this will supply a 100% White signal to the Display). Plug in the AC to the PSU thru CN8001. ...
Question about Magnavox 55P9271 55" Rear Projection Television
...edge of the screen, it is cut off. It seems like my tv now thinks that it is a 62'' in stead of the 55'' that it really is. I called around to some local repair places and they told me that they had ...
100% certain. I had the Same issue. on a 50PF9431D/37 set. Many Plasma Set's use a LJ44-00118A PS-505-PH Power supply from Samsung. Known to have this common problem. If you can, or have a friend that
Question about 42PF9630A 42 in. Plasma Television
...edge of the PCB. A local shop may Carrie them if not, digi-key has them. Part # http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=493-1754-ND. Total cost was $7 with S/H. there may ...
Question about 42PF9630A 42 in. Plasma Television
...very dark. I can see the picture but it is still somewhat dark, bright in the middle,dark at the edges. I tried to adjust contrast, brightness but nothing works. Any ideas? Sounds like you may
100 and i can't change any thing. have you figured out your problem? if yes, how? This is a mechanical and not software/driver problemI had the same problem. It was due to the right button being stuck
dimmer compatible with GE J6 bulb? Or Philips 100 W 14W LED or KOR 80 CRI 9 watt 800 lumens 120 V If it is the falling edge type of dimmer and the lamps you wish to use are dimmable, yes. Otherwise no
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions