Questions & Answers for: Hyundai Sonata ecu seat

Question about Hyundai Sonata

1 Answer

...say it's a 5 speed auto trans... and the car is going about 35mph at 5th gear... even though the ecu in the car recognizes it should go to 4th gear, the only thing the car ecu can do is reduce the ...

Ad

Cannot locate the computer module (ECU) in the 1998 Sonata HELP Need to change the ECU but cannot find where it is located in the Hyundai Sonata 1998. Gregorys do not make a manual. lower right ...

Ad

...problem is still there. Engine turns over after it dies, but will not start Wiring problem or the ECU (engine control unit) is defective. Try this, disconnect the battery cables from the battery

...Sonata had a transmission failure before days. We got it fixed by uploading a data program to the ECU. Now, the Auto up/down window of the driver side is not working well. The auto down is working ...

...at the brake pedal, also check for trouble codes. Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular ...

...chugged on acceleration this morning and now will not start Insufficient information. Have the ECU (Engine Control Unit) scanned for any codes, then get back to me with any codes found stored in ...

...and see if it is wirking, if not there is a broken wire or the drive for that injector in the ecu is bad, which means you need to replace the ecu i have same problem with ECU on my Cruze,master ...

Question about 2001 Sonata

1 Answer

...ECU Defect -- still under warranty. The current OC system covered in this specification continually senses and classifies the front passenger side seat. OCS is utilizing a robust weight measuring ...

...engine. The job of that unit is to get the water temperature and as electronic connected with the ecu is giving the message for cold start  rev up until the water temperature change to hot and ...

Question about 2011 Sonata 2.4

1 Answer

...seat. OCS is utilizing a robust weight measuring technology. Thus, if any of the following conditions occur, 'command zero' and 'accuracy check' should be performed The weight classification ECU or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...