reset the ecu, but it comes back. Thanks Steve Your port should be located under the dash on the driver's side near your knee area. The port should be pointing straight down from the dash. The scanner
...ECU reset is complete. You can try disconnecting the battery, but if the ABS is fixed, it should run the test when you turn the key on and if everything is good, the light will go off by itseff. I ...
...reset of OBDII code you will need a OBDII reader unit. It's good to read and record the code(s) the computer (ECU) for future reference (after the repair). === The alternative method is to disconnect ...
...reset the ECU do the following: 1. Disconnect - (minus) battery lead for at least 30 secs. 2. reconnect it 3. turn ignition on and of three times for 5 seconds each. 4. start engine after third time. ...
ECU noted a difference between the input from one of the wheel hub speed sensors and the differential speed sensor. This might be glitch or it might be a faulty sensor. Try this: engage drive and ease
Usually answered in minutes!
424 Questions
401 Questions
234 Questions
177 Questions
2 Questions
