Questions & Answers for: Cadillac ecu reset

Question about 1989 Eldorado

1 Answer

...ECU codes on 89' Elderado from the computer. For the purposes of the D.I.C. LO = NO HI = YES Starts here: PRESS: OFF & WARM (red button) together -the D.I.C. will light up the instrument cluster like ...

Ad

Question about 1999 DeVille

1 Answer

...reset the car's ECU by removing the negative cable of the battery for 1-2mins. Have the knock sensor of the car checked. It should adjust the timing for the ignition to compensate for lower octane of ...

Ad

...reset for ECU There is a reset for the ECU but unfortunately it's not a DIY job. All dealers and most mechanics have the special equipment for an accurate reset. HINT: Theres an inexpensive device on ...

I had back brakes and rotor fix but the brake pad light still on how do I turn it off Try to take out the positive terminal of the battery for one hour then replace it,this will reset the E.C.U .See ...

...reset the ECU, how do I do that? To restart the ECU unplug the battery for 1/2hr and turn key on But if your battery was bad The ECU should have lost power then.. What i do to be sure is unplug red ...

Question about 2002 Deville

1 Answer

reset my ecu and I cant find it were is it located at? Instructions 1 Turn the ignition switch to "Off." 2 Pull down on the top of the fuse panel lid beneath the steering column. Remove the fuse panel

...Allante suddenly won't shift into 3rd. maybe a diagnostic or limp mode, try resetting codes / ecu by disconnecting and reconnecting the battery. If that fails check for loose or disconnected ...

...the sensor. If it doesn't, simply get somebody with an OBD - handheld diagnostic machine - to reset the warning light. Everything is controlled by the ECU. Replace, reset ... it is all done by the ...

reset ecu on 1994 Cadillac Deville Resetting ECU on 1994 Cadillac Deville The only reset I know of on OBD-1 systems (like yours) is to disconnect battery for a couple of minutes. Take off the negative

...ECU fuse using the fuse pullers in the fuse panel. 4 Turn the ignition key to the "on" position but do not crank the engine. 5 Wait 5 minutes and replace the ECU fuse. The computer will reset

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...