Questions & Answers for: Pioneer earth surface

...what was the point but at last got it any way it appers that your device has a problem of earthing (ground) try connecting a copper wire to the metal surface of the device to antoher metal ...

...wire also coming off the cable. Where does that one connect to. The small black wire needs to be earthed. There's one cable with an Earth connection and the other side have some strange

...clean tight connection. If the problem persists, check ALL your hi-fi components mains plugs for earth connections including your turntable, then remove the earth connections on all but one ...

...engage the parking brake? You can get the bypass instruction on Ebay for about $10. Goodluck. just earth the hand brake cable connection to the car. you cut the wire from the unit and simply earth

...time Switched +12v ( accessories, or switched by the radio only when it's on, and Ground (Chassis Earth) I think there was 2x orange and one black wire Make sure that there is a good earth to the ...

...was wired professionally with a full Pioneer system when i purchased it. sounds like either a bad earth or a bad remote signal. check the earth cable for continuity - make sure that it has a good ...

. yellow is constant power, red is ignition power, blue is either phone or electric areal, black is earth and the other 8 wires are for 4 speakers, usually similar colours for each speaker, one with a

...ground the system If it's a modern unit and has just two leads running to the power plug then don't Earth it, EVER. All modern equipment is doule insulated and definitely does NOT need earthing. The ...

...and I'm trying to put it in another car. I have the battery wire connected to the power and the earth wire earthed. I don't get it.??? do you have the red wires connected to a switched power ...

Pioneer A 35 turntable buzzing at start up You have an earth problem. Either a wire is loose to the cartridge or an earth connection is needed to the deck.