Questions & Answers for: dvr reboot

Won't record in HD. DVR shows to be recording, but when you click on the programmed HD channel (the one that's supposedly recording) it's blank and says "searching for satellite". Just started ...

...dvr to record while away. Just returned to find that I cannot access reord data and the system keeps rebooting like every 2 minutes My Swann cctv hard drive try's to reboot over and over thanks K A ...

...DVR and Router didn't reboot after saving these changes reboot.On the phone ap I found the following two cameras to work with the H.264 DVR System V2.00.R05:Make: Unknown Brand  Model: ...

reboot my Zmodo dvr I Can't get menu to come up or mouse to work HDD light keeps flashing,blinking hdd light,HDD indicator light When I reboot my Zmodo 4 ch DVR I can't get menu to come up

...unplugging the DVR unit for like about an hour and plugging power it back in for the DVR unit for the software to reboot itself.90 to 95% the unit will work again as u first got the DVR

dvr will not stop beeping Your DVR hard drive is defective, replace hard drive and reboot the DVR.

...DVR will not reboot itself, it says loading but does not. There has to be a reset. Disconnect the power for about 5 minutes; the wait is to let the internals discharge (5 is minimum, a little longer ...

...8 channel h.264. Was working fine a few days ago, now its beeping and I cannot get anything to come up on monitor. Your DVR hard drive might be defective, replace the hard drive and reboot the

DVR is stuck in a reboot cycle. As soon as it is finished rebooting, it beeps and reboots again. Any idea on how to fix this? Corrupted software [firmware]. A firmware update is necessary. Contact any

reboot. Could be a hard drive, power supply or DVR board issue. Try testing each by replacing except the DVR board which you cannot change without a new board. At which point, a new DVR is recommended