Questions & Answers for: Shop Vac dust

Question about 584-04-00 Quiet Canister Wet/Dry Vacuum

1 Answer

my shop vac blows dust as soon as it's turned on and throughout use. I have changed filters, nothing is helping. What part of my vac can not get wet, or is there a better way to clean out the system? ...

Ad

Question about 925-13 Canister Wet/Dry Vacuum

1 Answer

blows dust out of the exhaust Take the top off and check to see if your filter is correctly in place. If so check the filter to see if its torn or has any holes in it. If so you will need to replace ...

Ad

Question about 925-13 Canister Wet/Dry Vacuum

1 Answer

I've been using a small shop vac in the seller to vacuum up dust, sawdust etc. I have emptied the inside and the filter looks laden with dust. It does not "****" any longer. What is wrong and what do ...

Question about (464-38-10) Canister Wet/Dry Vacuum

1 Answer

How to stop dust from escaping the shop vac tub The only sure fire way is to use a filter, bag and ensure you have what they call a "noise muffler" but in all reality it's a filter that not only dulls

Question about (464-38-10) Canister Wet/Dry Vacuum

1 Answer

Dust discharging from exhaust If you have a paper filter take it outside and knock it against the house and replace. Or if it has a cloth cover shake it and replace or make sure it is on properly. ...

I am vacueming concrete dust the filter is not filtering properly and the dust is bloing out of the vacuum Hi, When doing fine dust you need to get the paper filters that slide over the foam one and ...

Question about 85L500 Wet/Dry Vacuum

1 Answer

When dry vacuuming, my shop vac is shooting dust out the back. What do I need to do? Sounds like you need to re-install the air filter so there is a tight seal between it and the vacuum. You may have ...

Question about 925-13 Canister Wet/Dry Vacuum

1 Answer

ridgid shop vac. use filter or not when vac. water Just use the sponge filter, if wet dust goes through the blades, it will build up, throw it off balance and the vacuum blades will break loose from ...

how to correct a saw dust problem on a kobalt 10 .dust does not go into chot a 2 shop vac hel The hole behind the saw blade can become blocked solid with sawdust ( especially if the timber is green or

kobalt 10 saw blows dust everywhere ,even with a 2 shop vac connected to the dust chute . It is possible that the dust chute on the Kobalt saw is plugged, not allowing the vacuum to pick up the dust. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Shop Vac Vacuum Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

superjulimaximo
superjulimaximo

Level 2 Expert

320 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Shop Vac Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...